Product Name :

Plastic Vibration Welding Machine 3-5 Pcs / Min Speed Pneumatic Drive Mode

Item Model :

CN-568

Application :

The vibration welding machine is designed to weld plastic materials.

Applied for hot plasticity material, including amorphous resins such as ABS/PC, PVC, PMMA and PES.Half a crystalline resin such as HDPE, PA, PP, TPO.Panuni welding machine can be joint auto parts, such as intake manifold, dashboards, tail lights and bumper, etc;Aviation purposes such as HVAC duct, interior lights and storage tank;Electrical appliances have a dishwasher, detergent sprayer and water pump and arm suction machine shell.

Vibration welding machine Working Principle :

Linear vibration welding is that two plastic parts become to one in the formation of a friction pressure.

The workpiece welding under by friction in the pressurized state, the energy along the conductive portion of the heat capacity of the interface is melted and then cooled and
solidified to complete reduction in security.Lead to the interface strength equivalent the body strength.

The device can be welded 1300mm length 600mm width of large plastic workpiece and a variety of smaller size plastic workpiece. Vibration welding machine is equipped with digital vibrationfrequency conversion power source, automatic tracking adjustment frequency and has the function of automatic resonance and frequency. This machine is used to facilitate the operation of the touch screen display control and special control software.

Vibration welding is friction welding process, during which the workpiece to be welded together under pressure until the friction generated by friction and shear heat contact surface to fully molten state. When reaching the set welding depth (by linear sensor measurement), relative motion stops, enter the packing stage weld cooling and curing. Weld strength quality good, used for small car parts, plastic products, electrical appliances, metal, aluminum piece of office automation components industry.

Technical Specification :

Accessories :

1. A Toolkit box.

2. Some spare parts

3. Video CD

4. Manual

Preparation Before Using The Machine :

1. To check the power cable is connected or not, it is 3 phase and 5 wires for power.

2. we need to pre-heating 15 minutes for machine before starting the machine. It is good for machine.

3. To take air pipe to blow away the dust inside of the H.F bucket and working table , mould. It is to avoid the spark happen during the production .

4. You should adjust the temperature and welding time ,cooling time according to the thickness of your materials.

5. Fix the materials on the working table straight level and smooth to make sure the best welding effect.

Maintain :

1. Clean the H.F bucket, blow away the dust.

2. Clean the working table .

3. Check the power cord and plugs to avoid any mechanical damage.

4. To release the water of air filter container of the machine every day.

5. To lubricate the piston and guide bearing with grease.

FAQ :

1, Why do you choose ConnieWeld as your supplier

Shenzhen ConnieWeld Ltd is the most professional manufacturer of high frequency welding machine . We are dedicated to high frequency welding machine filed for more than 20 years. Since 1996 ,we are focus on the H.F technology developed all the time , ConnieWeld leading innovation of high frequency consistently.In order to meet customer demand, OEM&ODM is available. Our products have exported to Europe,America,Southeast Asia,Middle east countries, South Africa,South America etc.

2, Can i visit your factory?

Yes,you are available to visit our factory. We can offer you the H.F technical advice, and do some training for you. And there have machines in site of our factory ,we also do demonstration of how to operate the machine .

3, How to use the machine as a freshman.

There is a manual come along with the machine . If it still not clear for you,we can explain it by email,or video call. If it still is hard to understand how to use the machine , we could send the technical staff to be your place for doing a training for your workers.

4, What about the warranty?

Normally, we offer 2 years warranty of the machine. When the warranty is invalid , we still offer you the technical support for lifetime.

5, How can i get more information of the machine?

Call me at +86-13424166870

Company Information :

CONNIE is a manufacturer with R&D ,Manufacturing ,Sales. CONNIE H.F technical come from Japan,As to the H.F technical ,which was introduced from Japan to Taiwan in 1996, was developed in 1999 of mainland.

We are a leading company of high frequency welding machinery and ultrasonic plastic welding equipments and cylinder tube making machine .we are dedicated to offer automatic solution of high frequency &ultrasonic

for the customers from all over the world.

We focus on the development and production of radical new technologies, We offer installation and full technical service for our customers.