Powder Puff Welding Cutting Equipment 25T Pneumatic Press Auto Slide Table

MACHINE INTRODUCTION

Welding Cutting Machine has output power of 8-35kW, pneumatic press, automatic slide table operation. The machine is designed according to conditions and requirements of each manufacturer factory.

The dimensions of the work table are custom made in accordance with the welding electrode length. Applied for powder puff,PVC/PU leather dinning table mat,upper shoes embossing,upper shoes embossing,upper shoes embossing machine,upper shoes embossing machinery,upper shoes embossing machinery,high frequency welding machine,high frequency welding machine,high frequency machine,high frequency welding machine,high frequency welding machine,upper shoe welding machine,shoes cover welding machine,shoes cover welding machine,shoes cover welding machine,shoes welding machine,shoes making machine, etc.

. PRODUCT FEATURES

1. It adopts PLC and touch screen control to make the work precisely, and reduces operation difficulty.

2. Automatic slide table makes lower reject ratio and reduces labor intensity.

3. It requires low skill for operators. The operator can use it after short training.

4. The surface is perfect without seam, and the welding is strong, stiff and smooth.

5. It has big pressure, so it can cut the wasted edge in a short time after welding. So it makes the edge and pattern smooth and perfect.

6. Left & right slide table design, sometimes, 1 mold can be shared. So it saves the expensive mold cost.

7. It adopts high quality components, stable and low failure rate.

8. It adopts sensitive spark protection device. When it sparks, it will cut off the high frequency oscillation power, protect mold and material.

9. Without high frequency leakage because it adopts good shield device.

10. The mold can be changed easily and quickly because it adopts hanging mold device.

11. Safe & rational design to make sure the slide table will not hurt hands.

12. Special & strong head: Special design makes the pressure equably to make the products perfectly.

13. Heating device: It adopts heating device to increase the welding area for special material PET, PU, ETC.

14. Output power tuner: It can be adjusted according to different material to make sure the products can be made perfectly.

. APPLICATION RANGE

Applied for welding without seam for sports shoes cover, packing for toothbrush,

Synthetic leather ,Material covered with fabric,Blister with paper card,Trademark, watchband,

leather belt, CD bag,,PET, APET, PETG, PP, PET, EVA etc,phone cover welding and cutting.

. TECHNICAL SPECIFICATION

. Our Service

1. Customer's site installation, training & maintenance available

2. 12-24 hours Online service by Email, Fax, Video Online for basic setup and repairs

3. 12 months warranty for machine, life-long tech. support

4. Recommend equipment of top choice based on your requirements for product;

5. Examining mold drawings on your behalf to confirm optimum structure size meeting high frequency process;

6. Providing assistance in manufacturing and modifying tools;

7. Our engineering instruction will guarantee your productive manufacturing of top-quality products.

. FQA

Questions 01. How Do You Pack the machines ?

RE: Our machines will be packed into wood case, (we will process the wood case and make sure it is exporting standard, and no need fumigation)

Questions 02. Is it difficult to install the machine ?

RE: For standard small machines, the machines will be packed with no take apart, it comes to you to be a complete machine;

you just need to connect power and compressed air to machine, then begin to operate the machine.

For large size machines, we will take the machine apart, on condition that we do our best to keep the machine easy to assembly.

You will get install videos, and install instructions from us.

It will be an ABC thing to install machines at your side.

Questions 03. How Does Customer Use the machines ?

RE: We will provide you operation manual and diagram of machine in English.

For automatic machine and custom machine, we will provide operation videos to you.

Questions 04. Does the machine need compressed air ?

RE: Generally speaking, if your factory with compressed air source, then connect to machine.

If not, please buy a 2Psi -5 Psi air compressor.

If customer request to use Hydraulic pressure, please inform us when put an order.

Questions 05. Does the machine power voltage meet buyers' factory power source ?

RE: We can make machine with voltage like:

frequency: 50 - 60HZ Phases: single phase / 3 phases

Voltage: 110V / 220V / 380V/ 415V/ 440V / On request

Please kindly inform us what frequency/phases/voltage you want, when you put order to us.

Questions 06. Could you make die / mould for me, if I buy machine from you ?

RE: We design and make moulds up to product sample or drawings, we charge the mould price at facory cost price.

Questions 07. Can I visit you factory to check machines on-site ?

RE: We are manufacturer, and we welcome customers to visit our factory.

We located in Shenzhen, China; you may come to us by following:

a) Via. Hongkong to Shenzhen :

please reach check points between Hongkong and Shenzhen, we will arrange to pick you up from Check-point like Shekou, Lohu

b) Via. Guangzhou to Shezhen;

you may come by train to Shenzhen Luohu Station / Shenzhen North Railway Station.

we will arrange to pick you up from station.

c) Via. Shenzhen Airport :

Please inform us your flight number and contact information before you come, we will meet you at airport.

Questions 08. What Should I bring when I visit your factory ?

RE: For special product design and develop, we request you bring a piece of testing material, you can test on our machines on-site.

For common product, it is enough to show us product pictures or drawings.

material together. However, when an HF-welded seam is stressed, the load is absorbed by the material surfaces, which of course means that the HF-welded seam is stronger. Furthermore, the seam created with HF can be welded in a manner that provides a uniform transition without splices between the joined materials. There is no space through which dirt, moisture or bacteria can penetrate and impair the product’s strength and durability.